How to maintain and maintain metal stamping die?

2017/4/27 12:19:44

Hardware stamping die maintenance and maintenance methods:

1, metal stamping die in the course of the punch will be broken, twists and turns and gnawing and other phenomena, red sets are usually bite bad, punch and punch sets of damage is generally the same standard parts to replace.

2, metal stamping die in the press material parts such as pressing plate, gifted of plastic, etc .; discharge parts such as stripping board, pneumatic materials, such as the first. In the maintenance and maintenance of the parts to see if the parts are damaged, if there is damage to the timely correction, the aerodynamic top material depends on whether there is leakage phenomenon, and the details of the adoption of the approach. If the trachea is damaged, replace it.

3, metal stamping die spring and other flexible parts in the course of the most vulnerable to damage the spring, usually showing cracking and deformation; maintenance and maintenance methods can be replaced, but in the replacement process must pay attention to the spring standard and type, spring The standard and type through the color, diameter and length of the three items, only in the three cases are the same circumstances can be replaced.

The above is on the metal stamping die maintenance and maintenance methods, in order to extend the use of metal stamping die, we recommend the use of mold friends to pay attention to maintenance.